Wow, thanks for putting this together! This is a much more thorough list than I had come up with very useful. @howard had suggested the Tyler before. That’s the one I found to be a little big and just a bit more $ than I thought this function was worth.
I’m still sifting through the options. So far, the Sugar Britches looks promising.
That Pro-cessor @terb found looks pretty good. I’m trying to figure out if I adjust the X-over frequencies if that doesn’t really need a knob. The MXR chorus only has a crossover switch and not a knob, so maybe.
I did end up getting this! It totally works. I can use any guitar pedal I want and if it has low end tone suck, this puts it back. Or I can thin out the frequency range that gets the effect. It’s easily useful for distortion and chorus, maybe other things too.
Yes. It has a loop send and return. You can put anything in that loop you want. I think I remember you do the same with a noise gate loop. This sends everything above the crossover knob setting to the loop. The Hi knob sets the mix level for the loop return. Everything below the crossover setting goes to the Lo mix knob. It has a phase invert switch for the loop in case a distortion pedal is inverting and causes a problem adding the lo and hi back together where they overlap.
It does state that it has plenty of headroom, so not sure if that means it can handle more effects pedals, or if it is just just talking about the input it can handle (active bass)
It is a little confusing to know for sure if you can stack a loop of pedals or not.
I assume you are correct, just wondering if you have tried it, or if it is in theory?
Each pedal drives the next pedal, so it doesn’t matter that they are in an effects loop. If they would work as a pedal chain on their own, they will work in this loop.
Yes, the headroom means an active bass or hot pedal output won’t be likely to overload it.
Ty for clarification.
I just don"t like to assume too much in these cases where I don’t know gor certain, and the product description foes not clearly state.
If I assume, then I think I will end up having the next sad but often laughable post for the “bone head moves that destroyed equipment.” Thread (not sure exact title, but what i said should be enough to know whst i am referring to.
So, if not assuming, and asking questions where tga answer may really be obvious yo make sure, then, yeah, I will ask it
Thanks for answering.
Edit: the thread is “Expensive Mistakes.”
Sorry not trying to call others out as bone heads, but when I make posts in the thread, i am certainly calling myself a huge bonehead
Very thought out Pedal board that would be hard to top. IMHO. Seems like a lot? Makes my sound really come through for any style of song or solo! Any bassist would be happy with this setup. I run the first row of pedals direct into amp and the back row runs through the effects loop into either a Carvin BX1600 Amp, connected to a BR115 and a BR210 cabinets. Or an Ampeg PF800 into two PJB C4 Cabs. Night and day difference these pedals bring to sound! Love playin’.